Fabric edges should not be frayed by the Spun Polyester Dyed Yarn 人氣: 102 回覆: 0
Coloured Bag Closer Thread engages the thread tension as soon as the presser foot is lowered. An electronic machine engages this tension during the first stitch. Thus an electronic machine produces a looser first stitch. This can be overcome by holding the bobbin and needle threads taut for a few stitches at the beginning of a seam.
For easy and accurate sewing on either type of machine, these are options you may want to consider:
Accurate 1/8" seams: It should be possible to achieve a 1/4" seam allowance by aligning the fabric with the right edge of the foot, or with a line marked on the foot, or on the throat plate. Adjustable needle positions will allow you to accomplish this. A special 1/4" foot may also be available.
Using the right edge of the foot as a guide, the machine should feed the fabrics evenly across seams without pulling or distorting multiple layers. Fabric edges should not be frayed by the Spun Polyester Dyed Yarn .
Single-hole throat plate: The single hole prevents fabric from being pushed into the throat plate while stitching. During free-motion quilting, the single hole also brings the bobbin thread through at a consistent angle, no matter which direction the quilt is moved under the needle. This results in a more uniform tension and better looking stitch on the back of the quilt.
Immediate response to reverse stitching or changing stitch length: When sewing from point to point, as when setting in a patch, the machine should reverse direction immediately so the point-to-point seam can be reinforced at the ends.
Sensitive foot control: The Virgin Bright White PP Bag Closing Thread should be able to sew slowly at a uniform speed. Even-feed foot (with quilting guide bar): An even-feed, or walking foot, feeds multiple layers of fabric and batting smoothly for machine quilting. The quilting bar guides you in stitching parallel lines without marking. On newer machines, the quilting bar can be attached directly to the even-feed foot.
Table for level surface: A removable table that surrounds the machine's sewing surface makes a smooth, level area for easier quilting.
Darning foot or free-motion quilting foot: The toe of the foot should be made of clear plastic so quilting lines can be easily seen.